A range of multi directional mounts with very large deflection manufacture with elastomer and metal parts.
The elastomer is based on natural rubber which has been specially developed for marine applications.
The mounts provide a high level of vibration isolation and shock attenuation. Their strenght is equal to a continuous acceleration of 10g at the maximum load. The range includes 5 references with load ranging from 11 to 94 daN.
The mounts meet the shock requirements for European and North American specifications. The metalwork is covered with elastomer to protect it against corrosion (ex. : salt fog).
The S.T.C. mounting comprises a rubber ring bonded to a central tube.
– Inner tube: mild steel.
– Bonded rubber in the form of a ring at the top with a collar below which is used for fixing.
The SANDWICH mounting comprises one or more layers of elastomer bonded to flat, parallel metallic plates. These mountings may be cylindrical or rectangular. They are designed to withstand very high compressive loads. The range of mechanical characteristics is governed by the hardness of the rubber and the number of intermediate metallic plates.
These mountings can support compression from 20 to 100 bars.
The metal plates usually receive a phosphate anti-corrosion treatment.
The elastomer is polychloroprene which provides a high resistance to atmospheric exposure.
The S.C. mounting comprises an annular section bonded between the inner tube and outer housing.
The outer housing has a mounting flange (4 different types).
