Office machines, motors, fans, HVAC equipment, electronics equipment, telecommunication equipment.
Rings and bushings
All elements made of elastomer. Elastomer is compatible with the majority of the industrial environments and has an operating temperature range of -40°C to +83°C.
Download PDF catalog
Related products
Engine mountings
Is made of one conical elastomeric elementen closed in a cast iron assembly.
This engine mounting is made of one conical elastomeric elementen closed in a cast iron assembly. A built-in adjustable stop limits the vertical and lateral displacement during shock. This mount is available in four different alternatives depending on the type of upper fixing needed.
It can be supplied with or without levelling system and with a threaded hole or a threaded stud.
Download PDF catalog
Disc drive suspensions
A silicone (VHDS) elastomer with a bonded metal insert.
A silicone (VHDS) elastomer with a bonded metal insert. The legs have tangs which enable each leg to be pulled through mounting holes in the equipment. The suspended component can then be attached with an M3 screw through the insert. The tangs can be cut off after insertion.
Stops
Elastic stops are quiet and avoid hammering and deterioration of equipment.
There are several types of stops:
– Cylindrical or DIABOLO stops.
– Conical progressive stops.
– LEVAFLEX progressive stops with central cavity.
– EVIDGOM stops.
Download PDF catalog
Pneumatic Mounts SLM
It consists of a thick chamber of synthetic rubber.
SLM pneumatic mounts are made from synthetic rubber and are laterally reinforced with steel springs. The base plate is bored with 4 smooth holes to allow a possible fixing on the ground and the valve allows to inflate the mount in the same way as an automobile tyre.
– Elastomer body (temperature range -30ºC to +180ºC) resitant. To oils, te majority of solvents and natural ageing.
– The top and bottom plates are available in both steel and aluminium.