– Natural frequency (vertical and lateral) under nominal load: 4 to 5.5 Hz.
– Maximum displacement under shock: 75 mm* all in directions.
V1B VHD 75 Low Loads
Elastomer isolators designed for acoustic isolation and shock protection.
Download PDF catalog
Related products
“Sandwich” Mounting
It consists of one or more layers of elastomer between two metal reinforcements.
The SANDWICH mounting comprises one or more layers of elastomer bonded to flat, parallel metallic plates. These mountings may be cylindrical or rectangular. They are designed to withstand very high compressive loads. The range of mechanical characteristics is governed by the hardness of the rubber and the number of intermediate metallic plates.
These mountings can support compression from 20 to 100 bars.
The metal plates usually receive a phosphate anti-corrosion treatment.
The elastomer is polychloroprene which provides a high resistance to atmospheric exposure.
Download PDF catalog
Rings and bushings
All elements made of elastomer.
All elements made of elastomer. Elastomer is compatible with the majority of the industrial environments and has an operating temperature range of -40°C to +83°C.
Download PDF catalog
Disc drive suspensions
A silicone (VHDS) elastomer with a bonded metal insert.
A silicone (VHDS) elastomer with a bonded metal insert. The legs have tangs which enable each leg to be pulled through mounting holes in the equipment. The suspended component can then be attached with an M3 screw through the insert. The tangs can be cut off after insertion.
Supports and bump stops
Rubber blocks allowing the absorption of shock, vibration or serving as stops limit.
Rubber blocks of various shapes allowing the absorption of shock, vibration or serving as stops limit.