Deflections of 45 to 55 mm during shock reduce the transmitted accelerations.
Flexible mountings for high loads MN 45
A load range of between 30 to 1,080 kg, depending on the different configuration and shock specification.
Download PDF catalog
Related products
Pipe isolators
Maintaining the link between pipe and structure providing vibration isolation.
Natural frequencies under nominal load:
– axial: 10 to 30 Hz
– radial: 15 to 40 Hz
Maximum displacement in axial shock: ± 5 mm
Temperature range: 0 to 175° C
Download PDF catalog
Laminated bearings
Are used to absorb very high axial loads of up to 150 tons.
Conical (fig. 1) or spherical (fig. 2) units are used to absorb very high axial loads of up to150 tons.
Angular movement around an axis (Oz in the case of the conical bearing) or a centre of rotation (O in the case of the spherical bearing) are in the order of ± 10°.
Download PDF catalog
Flexible mountings for low loads MN 50
They allow to limit the reactions at the moment of the shock.
The permitted deflection (40 to 50 mm) of the suspended mass in relation to the mounting base limits reaction under shock.No efficient vibration protection is offerred during shock.
Download PDF catalog
Flexible mountings for low loads MN 75 composite
They ensure a low level of vibratory transmission in a broad frequency band.
These mountings were developed to handle small loads under large deflection (75 mm) and provide a low vibration transmission over a wide frequency range (up to 500 Hz).
The system developed provides this dual function effectively and without compromise.