Protecting electronic equipment, navigation equipment, instrument panels, measuring instruments, control panels on aircraft, road vehicles and railway trains.
E1E41 / E1E42 / E1E43
VHDS elastomer able to carry loads under compression.
Base and centre axis in stainless steel.
Download PDF catalog
Related products
Flex-Loc
A flexible fixing resistant to oils, the majority of solvents and ageing.
A flexible fixing resistant to oils, the majority of solvents and ageing.
Download PDF catalog
Supports and bump stops
Rubber blocks allowing the absorption of shock, vibration or serving as stops limit.
Rubber blocks of various shapes allowing the absorption of shock, vibration or serving as stops limit.
Download PDF catalog
“Sandwich” Mounting
It consists of one or more layers of elastomer between two metal reinforcements.
The SANDWICH mounting comprises one or more layers of elastomer bonded to flat, parallel metallic plates. These mountings may be cylindrical or rectangular. They are designed to withstand very high compressive loads. The range of mechanical characteristics is governed by the hardness of the rubber and the number of intermediate metallic plates.
These mountings can support compression from 20 to 100 bars.
The metal plates usually receive a phosphate anti-corrosion treatment.
The elastomer is polychloroprene which provides a high resistance to atmospheric exposure.
Download PDF catalog
Disc drive suspensions
A silicone (VHDS) elastomer with a bonded metal insert.
A silicone (VHDS) elastomer with a bonded metal insert. The legs have tangs which enable each leg to be pulled through mounting holes in the equipment. The suspended component can then be attached with an M3 screw through the insert. The tangs can be cut off after insertion.