Elastomer rings for linking and positioning of equipment while maintaining acoustic discretion and protection from shocks.
Decoupling washers
A decoupling washer is composed of:
– 2 bonded elastomer washers
– 1 stainless steel anti-shock washer
– 1 stainless steel preload spacer
Download PDF catalog
Related products
Flexible mountings for low loads MN 50
They allow to limit the reactions at the moment of the shock.
The permitted deflection (40 to 50 mm) of the suspended mass in relation to the mounting base limits reaction under shock.No efficient vibration protection is offerred during shock.
Download PDF catalog
Flexible mountings for high loads MN 75 elastomer
Elastomer isolators designed for acoustic isolation and shock protection.
– Natural frequency (vertical and lateral) under nominal load: 4 to 5.5 Hz.
– Maximum displacement under shock:75 mm all in directions.
– Mechanical strength: 30 g
Download PDF catalog
Anti-Vibration mountings for avionics and electronics
Applications range from vibration isolation to shock-protection of electronic apparatus.
Models are available in different elastomers: silicon, fireproofed silicon, fluorosilicon or neoprene, to meet the requirements of the main aeronautics standards (FAR 25 – AIR 7304 – MIL STD 810 – C 172 C -MAR 508 s.o.).
Covering a natural frequency range of 15 to 50 Hz, their applications range from vibration isolation to shock-protection of electronic apparatus and also aircraft fuselage and helicopter cockpit mountings.
Download PDF catalog
Laminated bearings
Are used to absorb very high axial loads of up to 150 tons.
Conical (fig. 1) or spherical (fig. 2) units are used to absorb very high axial loads of up to150 tons.
Angular movement around an axis (Oz in the case of the conical bearing) or a centre of rotation (O in the case of the spherical bearing) are in the order of ± 10°.