Deflections of 45 to 55 mm during shock reduce the transmitted accelerations.
Flexible mountings for high loads MN 45
A load range of between 30 to 1,080 kg, depending on the different configuration and shock specification.
Download PDF catalog
Related products
Laminated mountings
These assemblies can withstand high compression loads.
These assemblies can withstand high compression loads (along Oz): up to1,000 tons/sq.meter.
They can absorb shear deformation (along Ox and Oy) of 50 to 100% of their height.
Cylindrical or annular type assemblies can also withstand torsional displacement around axis Oz.
In rotation around axes Oy and Ox, these mountings enable angular or low amplitude rotation errors (approximately 1°).
Download PDF catalog
Flexible mountings for high loads MN 10 – MN 15
A load range of between 20 to 5000 kg.
– Vertical own frequencies under nominal loads of 5 to 7 Hz.
– Own lateral frequencies under nominal loads of 3 to 6 Hz.
– Stop after 10 mm of displacement. Maximum force on the top of 30 g
Download PDF catalog
Flexible mountings for high loads MN 75 elastomer
Elastomer isolators designed for acoustic isolation and shock protection.
– Natural frequency (vertical and lateral) under nominal load: 4 to 5.5 Hz.
– Maximum displacement under shock:75 mm all in directions.
– Mechanical strength: 30 g
Download PDF catalog
Laminated bushes
Laminated BUSHES use the same principle as other laminated bearings.
Laminated BUSHES use the same principle as other laminated bearings. Importance is primarily given to radial load capability along Ox and Oy which may be up to 100 tons.
Movement is allowed around an axis Oz or a centre of rotation O. Angular deflection is in the order of 30°.