Anti-vibration mounts for presses and machine tools without the need to fix or grout in position.
For chemical, food industry,…
PDM-1000 / PDM-2000
Low profile mounts with high static and dynamic load range.
– 100% 316 stainless steel.
– Natural frequency from 15 to 18 Hz.
– Dynamic load in compression: 3 g.
– Maximum sinusoidal input at resonance: ± 0.4 mm.
Download PDF catalog
Related products
VE101 / VE111 / VE112 / VE113
VE isolators have a cylindrical stainless steel spring.
VE isolators have a cylindrical stainless steel spring, a galvanized body, an elastomer noise reduction guide and steel rings or studs depending on the model.
The VE112 series has a steel cushion inside the spring.
Download PDF catalog
VIBRAFLOT 357 – 961
VIBRAFLOT® is an antivibration system.
VIBRAFLOT® is an antivibration system consisting of the following elements:
– metallic box containing a low frequency spring;
– elastomer sheet to isolate high frequencies;
– system to fift the floating floor and set its height.
Download PDF catalog
Shock absorber for transformers
They consist of two steel soles and two high-strength metal springs.
This range of shock absorbers consists of two steel soles and two high-strength metal springs, light alloy joint washers and a metal cushion in stainless steel wire on each spring. An external protective sheet prevents possible intrusions of materials that stiffen the shock absorber.
All steel parts are protected by a layer of paint. These elements are very easy to assemble and adapt to the needs of the equipment.
They comply with the ISO 9001-2000 standard.
Download PDF catalog
MV-32 / MV-33 / MV36
Steel shock absorber working in pull and compression.
Steel shock absorber working in pull and compression.
– Shroud, cup, cushions, axle and screw in stainless steel 18/8
– Damper elements in stainless steel yarn 18/8
– Protection: passivated
Weight (aprox):
MV-32: 140 gr
MV-33: 275 gr
MV-36: 640 gr