The range V5651, V5652 and V5653 is made up of a shroud, a steel sore and a aluminium axle. The resilient elements is a metal cushion in stainless yam. Steel pieces are protected by a coat of paint.
The design of the V5651 / 2/3 allows them to work with compression and traction for identical loads at their own frequency between 15 and 20 Hz.
Reinforced with radial cushions, can make significant horizontal dynamic efforts, allowing its use to isolate material transported on board ships, rail and road, public works machinery and agricultural (engines, pumps, generators, converters, etc.). like machines to fixed position or that require a fixation in the ground.
Steel shock absorber supporting compression and pull loads.
– Shroud and base in aluminum alloy AG3. Satin finished.
– Stailess steel axle 18/8 passivated
– Stailess steel Spring and cushions 18/8
Weight (aprox):
MV-72: 60 gr
MV-73:160 gr
VE isolators have a cylindrical stainless steel spring, a galvanized body, an elastomer noise reduction guide and steel rings or studs depending on the model.
The VE112 series has a steel cushion inside the spring.
The V164 and V168 dampers have a cover, an AG3 mounting plate andan AU4G shaft. The assembly is chromatised.
The upper and lower stainless steel cushions are the resilient elements of the mounting. It has four Ø 8 mounting holes on the mounting plate and one M10 tapped hole on upper cover.
The basic element of an expansion joint is the corrugated metal bellows, annularly from a longitudinally welded tube, or seamless tube, in one, two or several lamella constructions. Designed and manufactured in compliance with EJMA standards.
