Elastomer spring bearing assembly.
Connecting rod pivot.
Flexible mountings for low loads MN08 – MN09
The main role of these mountings is to isolate vibration. A snubber system limits the movement of the suspended mass (10 mm), however the loads developed in this case, are high.
A wide load range from 5 to 320 N depending upon the application.
Download PDF catalog
Related products
Laminated mountings
These assemblies can withstand high compression loads.
These assemblies can withstand high compression loads (along Oz): up to1,000 tons/sq.meter.
They can absorb shear deformation (along Ox and Oy) of 50 to 100% of their height.
Cylindrical or annular type assemblies can also withstand torsional displacement around axis Oz.
In rotation around axes Oy and Ox, these mountings enable angular or low amplitude rotation errors (approximately 1°).
Download PDF catalog
Laminated bearings
Are used to absorb very high axial loads of up to 150 tons.
Conical (fig. 1) or spherical (fig. 2) units are used to absorb very high axial loads of up to150 tons.
Angular movement around an axis (Oz in the case of the conical bearing) or a centre of rotation (O in the case of the spherical bearing) are in the order of ± 10°.
Download PDF catalog
Laminated bushes
Laminated BUSHES use the same principle as other laminated bearings.
Laminated BUSHES use the same principle as other laminated bearings. Importance is primarily given to radial load capability along Ox and Oy which may be up to 100 tons.
Movement is allowed around an axis Oz or a centre of rotation O. Angular deflection is in the order of 30°.
Download PDF catalog
Pipe isolators
Maintaining the link between pipe and structure providing vibration isolation.
Natural frequencies under nominal load:
– axial: 10 to 30 Hz
– radial: 15 to 40 Hz
Maximum displacement in axial shock: ± 5 mm
Temperature range: 0 to 175° C