The BECA mounting comprises one piece elastomer bonded to a top and bottom plate.
– Top plate: smooth or threaded (welded nut) hole.
– Bottom plate: Fixing lugs or direct bearing on the ground.
– Bonded rubber.
– Domed rubber ring.
– Anti-slip bead or grooved anti-slip sole.
– Removable protective top cover: protects the rubber and distributes the load.
The design of the BECA mounting gives the following basic characteristics:
– Transverse elasticity approximately the same as the axial elasticity(equi-frequency).
– Rubber works in compression.
– Progressive buffer against shocks or accidental overload.
– Anti-slip (may be placed directly on the ground).
The NIVOFIX mounting is an adjustable equipment foot comprising a circular disc bonded to a protected elastomer base. An adjustement screw is fitted into the assembly.
The elastomer base has anti-slip ridges.
The EVIDGOM mounting is formed from two thick conical membranes, joined at their bases to create a highly elastic mounting.
There are three variations:
– All rubber EVIDGOM.
– EVIDGOM with bonded fixing.
– EVIDGOM with a diamond or square mounting plate (fixing plate supplied as a separate kit).
SLM pneumatic mounts are made from synthetic rubber and are laterally reinforced with steel springs. The base plate is bored with 4 smooth holes to allow a possible fixing on the ground and the valve allows to inflate the mount in the same way as an automobile tyre.
– Elastomer body (temperature range -30ºC to +180ºC) resitant. To oils, te majority of solvents and natural ageing.
– The top and bottom plates are available in both steel and aluminium.
