– Natural frequencies (vertical and lateral) under a nominal load of 5 to 8 Hz.
– B = unloaded.
– B – 6 mm height under nominal load (deformation under load . 6 mm).
– Maximum deflection from loaded position ± 10 mm in all directions (vertical and lateral).
– Stop at 10 mm deflection, maximum acceptable loads = 150 x nominal static load.
Low deflection mounts Low Loads
The main role of these mounts is to isolate vibration. A snubber system limits the movement of the suspended mass (10 mm), however the loads developed in this case, are high.
A wide load range from 0,5 to 32 daN depending upon the application.
In case of shock protection, the structural resistance of the mount can accept acceleration of up to 150 g.
These mounts are mainly suited for vibration, hence the loads generated in case of shock are very high.
Fixation on the inside or on the outside.
Download PDF catalog
Related products
Supports and bump stops
Rubber blocks allowing the absorption of shock, vibration or serving as stops limit.
Rubber blocks of various shapes allowing the absorption of shock, vibration or serving as stops limit.
Download PDF catalog
Stabiflex
It is formed by a rubber ring attached to two metal reinforcements.
The STABIFLEX mounting comprises a conical rubber section bonded between inner and outer metal parts.
– Centre axis with threaded hole.
– Square (4 holes) or diamond base (2 holes) with clearance hole.
– Bonded natural rubber, anti-slip bead.
– Cup to protect the rubber and distribute the load.
Download PDF catalog
S.C. Mounting
The S.C. mounting comprises an annular section bonded between the inner tube.
The S.C. mounting comprises an annular section bonded between the inner tube and outer housing.
The outer housing has a mounting flange (4 different types).
Download PDF catalog
Paulstradyn®
Anti-vibration decoupling for fixed equipment.
– Better than 90% isolation at 1.500 rpm(25 Hz).
– Constant height over wide load range.
– Stabilised characteristics during Service Life.
– Simple to fit.
– 400 hours protection against salt spray*.
– Design.