Vibration and noise isolation systems.
Metal shock absorber, low frequency, with semi-elastic retaining divide by means of metal mesh.
Especially suitable for equipment mounted on board ships that rotate above 650 rpm: main and auxiliary engines, compressors, fans, pumps, superstructures, bridges, control cameras, etc.
They can also be used on equipment mounted on another type of transport such as rail or truck.
The V164 and V168 dampers have a cover, an AG3 mounting plate andan AU4G shaft. The assembly is chromatised.
The upper and lower stainless steel cushions are the resilient elements of the mounting. It has four Ø 8 mounting holes on the mounting plate and one M10 tapped hole on upper cover.
This low frequency shock absorber I sable to work in compression and pull. It is able support lateral stresses.
This range of shock absorbers consists of two steel soles and two high-strength metal springs, light alloy joint washers and a metal cushion in stainless steel wire on each spring. An external protective sheet prevents possible intrusions of materials that stiffen the shock absorber.
All steel parts are protected by a layer of paint. These elements are very easy to assemble and adapt to the needs of the equipment.
They comply with the ISO 9001-2000 standard.
This suspension system consists of rectangular cushions made of woven compressed stainless steel wire.
The VI786 have a Ø 9 bored screw hole, so that they can be mounted in collars with the diameters required by the user.